Charging The Battery - Silvercrest SADP 4 A1 Instrucciones De Uso

Charging the battery

Before using the tracker, the integrated battery must be completely charged.
Before charging, dry the charging contacts
Connect the USB plug on the charger cable
♦
power supply.
Connect the charging contact
♦
contact on the tracker. This is only possible in one position (see fig. 1).
During the charging process, the display appears. The menu button
▯
inactive during charging.
Charging takes about 3 hours on a standard USB connection.
▯
As soon as the tracker is fully charged,
▯
Operating time with a full charge:
approx. 2 weeks if heart rate measurement is not used
▯
approx. 1 week if heart rate measurement is used for 1 hour per day
▯
approx. 8 hours if heart rate measurement is constantly recording
▯
The running time can vary depending on the frequency of usage.
When the battery is empty, appears on the display.
SADP 4 A1
,
on the charger cable
Fig. 1
with a cloth to avoid corrosion.
to a PC or to a USB
with the charging
appears on the display.
US - EN
is
7 ■
│