Axis P13-LE Serie Guia De Instalacion página 3

This digital equipment fulfills the requirements for RF
emission according to the Class A limit of EN 55032. The
product shall be connected using a shielded network cable
(STP) that is properly grounded. Notice! This is a Class A
product. In a domestic environment this product may cause
RF interference, in which case the user may be required
to take adequate measures.
Australia/New Zealand
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of AS/NZS CISPR 32.
The product shall be connected using a shielded network
cable (STP) that is properly grounded. Notice! This is a
Class A product. In a domestic environment this product
may cause RF interference, in which case the user may be
required to take adequate measures.
Japan
この装置は、クラスA機器です。この装置を住宅環
境で使⽤すると電波妨害を引き起こすことがあり
ます。この場合には使⽤者が適切な対策を講ずる
よう要求されることがあります。 VCCI ‒ A
本製品は、シールドネットワークケーブル(STP)を
使⽤して接続してください。また適切に接地し
てください。
本製品は電気通信事業者(移動通信会社、固定通
信会社、インターネットプロバイダ等)の通信回線
(公衆無線 LAN を含む)に直接接続することがで
きません。本製品をインターネットに接続する場
合は、必ずルータ等を経由し接続してください。
Korea
이 기기는 업무용 환경에서 사용할 목적으로 적합
성평가를 받은 기기로서 가정용 환경에서 사용하
는 경우 전파간섭의 우려가 있습니다. 적절히 접지
된 STP (shielded twisted pair) 케이블을 사용하여
제품을 연결 하십시오.
Safety
If its connecting cables are routed outdoors, the product
shall be grounded either through a shielded network cable
(STP) or other appropriate method.
This product complies with IEC/EN/UL 62368-1, safety of
audio/video and IT equipment, and IEC/EN/UL 60950-22,
Safety of Information Technology Equipment. The product
shall be grounded either through a shielded network cable
(STP) or other appropriate method.
The power supply used with this product shall have a rated
output voltage within voltage range of 12–28 V DC, and a
max current rating of 3.5 A.
The power supply used with this product shall fulfill one of
the following requirements:
Safety Extra Low Voltage (SELV) according to clause
2.2 of IEC/EN/UL 60950-1 and Limited Power Source
(LPS) according to clause 2.5 of IEC/EN/UL 60950-1 or
CEC/NEC Class 2 source of supply as defined in the
Canadian Electrical Code, CSA C22.1 and National
Electrical Code, ANSI/NFPA 70
Class 1 electrical energy source (ES1) and Class 2 power
source (PS2) rated output power limited to
≤100 W according to IEC/EN/UL 62368-1
When used with Power over Ethernet (PoE), the Power
Sourcing Equipment (PSE) shall comply with IEEE 802.3af
and Limited Power Source (LPS) according to clause 2.5 of
IEC/EN/UL 60950-1 or annex Q of IEC/EN/UL 62368-1.
We recommend the use of Axis midspans or Axis PoE
switches.
Photobiological safety
This product fulfills the requirements for photobiological
safety according to IEC/EN 62471 (exempt).
Disposal and recycling
When this product has reached the end of its useful life,
dispose of it according to local laws and regulations. For
information about your nearest designated collection point,
contact your local authority responsible for waste disposal.
In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be
disposed of together with household or commercial waste.
Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) is applicable in the European Union
member states. To prevent potential harm to human health
and the environment, the product must be disposed of in
an approved and environmentally safe recycling process.
For information about your nearest designated collection
point, contact your local authority responsible for waste
disposal. Businesses should contact the product supplier for
information about how to dispose of this product correctly.
This product complies with the requirements of
Directive 2011/65/EU and 2015/863 on the restriction of
the use of certain hazardous substances in electrical and
electronic equipment (RoHS).
China
This product complies with the requirements of
SJ/T 11364-2014, Marking for the restriction of hazardous
substances in electrical and electronic products.
有毒有害物质或元素
(Hg)
(Pb)
X
0
0: 表示该有毒有害物质在该部件均质材料中的含
量均在GB/T 26572标准规定的限量要求以下。
X: 表示该有毒有害物质至少在该部件的某一均质
材料中的含量超出GB/T 26572标准规定的限量要
求。
Contact information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
六价
多溴
联苯
(Cd)
(Cr-
(PB-
(VI))
B)
0
0
0
多溴
二苯
(PB-
DE)
0
loading

Este manual también es adecuado para:

P1377-leP1378-le