Home Decorators Collection ELLARD 52-PADA Guía De Uso Y Mantenimiento página 12

Assembly - Attaching the Light Kit
1
Installing the cage
□
Remove one screw (MM) from the black bracket below
fan motor assembly (E), and loosen but do not remove the
other two screws.
□
Push the cage (G) up to the fan motor assembly (E) so that the
two loosened screw heads fit into the keyhole slots. Turn the
cage (G) clockwise.
□
Re-install the screw (MM) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
2
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit pan.
□
Remove one screw (NN) from the cage (G) and loosen, but
do not remove the other two screws.
□
Connect the wires from the light kit fitter assembly (H) to
the wires from the fan motor assembly (E) by connecting the
molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
□
Push the light kit fitter assembly (H) up to the cage (G) so that
the two loosened screw heads fit into the keyhole slots. Turn the
light kit fitter assembly (H) clockwise to secure.
□
Re-install the screw (NN) that was removed in step 1.
□
Make sure all the screws are firmly tightened.
3
Installing the glass bowl
CAUTION: Make sure the power is off before attaching or
removing the glass bowl.
WARNING: Allow the glass bowl to cool completely before
removing.
WARNING: To prevent breaking of the glass and to avoid
personal injury, hand tighten all parts in order. Do not use any
tools to tighten the nut or finial.
□
Remove the finial nut (PP) from the threaded nipple of the
light kit fitter assembly (H).
□
Position the glass bowl (I) over the threaded nipple.
□
Re-install the finial nut (PP) to the threaded nipple to secure the glass
bowl (I) properly.
G
H
NN
12
E
G
MM
G
H
I
PP