Idiomas disponibles
Idiomas disponibles
4. Installation
• Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable norms.
• The installation must always be secured with a secondary attachment e.g. a safety cable.
• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician
check the device once a year and once before you bring it into service.
• Install the device in a location with few passers-by that is inaccessible to unauthorised persons
• Overhead mounting requires extensive experience: calculating workload limits, determining the installation
material to be used... Have the material and the device itself checked regularly. Do not attempt to install the
device yourself if you lack these qualifications as improper installation may result in injuries.
• Before mounting make sure the installation area can hold a minimum point load of 10 times the device's weight.
• Make sure there is no flammable material within a 0.5m radius of the device.
• Have a qualified electrician carry out the electric connection.
• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.
• The installation has to be approved by an expert before the device is taken into service.
How to install: Choose an appropriate installation spot. Fix each bracket (at ± 1550mm apart) onto the wall or ceiling
with the included screws using an appropriate screwdriver. Click the fluorescent tube into the brackets.
5. Use
• Turn the device on or off with the ON/OFF button.
6. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections.
3. Moving mechanic parts must not show any signs of wear and tear.
4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
5. Disconnect the device from the mains prior to maintenance activities.
6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
7. There are no user-serviceable parts.
8. Contact your dealer for spare parts if necessary.
7. Technical Specifications
Power Supply
Power Consumption
Dimensions
Total Weight
Lamp
Colours
Max. Ambient Temperature
Optional Stand
The information in this manual is subject to change without prior notice.
NLROD3x_v2
230VAC / 50Hz
max. 18W
725 x Ø35mm
0.5kg
20W
blue (NLROD2B), green (NLROD2G), orange (NLROD2O), red
(NLROD2R), ultraviolet (NLROD2W), white (NLROD2W), yellow
(NLROD2Y)
45°C
NLROD/ST
3
VELLEMAN
