Makita GA040G Manual De Instrucciones página 23

COMBINATION OF APPLICATIONS AND
ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
•
piece causing poor control.
When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
•
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type dia-
mond wheels, the wheel guard may interfere with the workpiece causing poor control.
• When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thick-
ness greater than the maximum thickness as specified in "SPECIFICATIONS", the wires may catch on
the guard leading to breaking of wires.
2
3
Fig.40
-
1
2
3
4
5
6
7
8
9
10
4 8
2
5
5
Application
-
-
Grinding / Sanding
-
Cutting-off
Wire brushing
Wire brushing
-
-
Cutting-off
1
2
6
100 mm (4") model 115 mm (4-1/2") model
Wheel Guard (for grinding wheel)
Depressed center wheel / Flap disc
Wheel Guard (for cut-off wheel)
Abrasive cut-off wheel / Diamond wheel
-
Clip-on cutting wheel guard attachment
-
-
23 ENGLISH
7
10
125 mm (5") model
Side grip
Wire wheel brush
Wire cup brush
Dust collecting wheel
guard for cutting-off
Diamond wheel
9