Idiomas disponibles
Idiomas disponibles
Product Safety Information
Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information
Manual Form 04580361.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Drive
Model(s)
Size
107XP
3/8"
1077XP
1/2"
† K
= 3dB measurement uncertanity
pA
‡ K
= 3dB measurement uncertanity
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet.
Drain condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily.
Install a properly sized Safety Air Fuse upstream of hose and use an anti-whip device
across any hose coupling without internal shut-off, to prevent hose whipping if a hose fails
or coupling disconnects. See drawing 16571804-2 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and
m=months. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
7. Coupling
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
04585063_ed2
Free
Recommended
Speed
Torque Range
rpm
ft-lb (Nm)
160
10-45 (14-61)
160
10-45 (14-61)
8.
Safety Air Fuse
9.
Oil
10. Grease - Inject between ratchet housing and yoke
to lubricate drive bushing.
11. Grease - Disassemble ratchet head and lubricate
components.
12. Grease - Disassemble gearing and lubricate
components.
Sound Level dB (A)
(ISO15744)
† Pressure (L
) ‡ Power (L
p
89.4
89.4
EN
Vibration
Level
(ISO8662)
)
m/s²
w
100.4
2.6
100.4
2.6
EN-1
