Dolmar EV-3618 Manual De Instrucciones página 4

ENGLISH
(Original instructions)
DESIGNATION OF PARTS (Fig. 1)
1. Start/stop lever
. Lock-off button
. Upper handle bar
4. Lower handle bar
. Cord strain relief
. Handle clamp
TECHNICAL DATA
Model name
Rated input power
No load speed
Maximum cutting width
Work height range
Grass catcher volume
Protection class
Sound pressure level
Sound pressure level at operator's ear
Measured sound power level
Guaranteed sound power level
SYMBOLS
The following show the symbols used for the machine. Be sure that you understand their meaning before use.
• Read instruction manual.
• Take particular care and attention.
• Double insulation.
• Wear protective gloves.
• Wear sturdy boots with non-slip soles.
• Wear eye and ear protection.
4
. Lever
8. Clip (x)
. Grass catcher
10. Defl ector guard
11. Knob
12. Height adjustment lever
Voltage
Frequency
Net weight
Vibration
13. Cutting tool
14. Bolt and spring washer
15. Bearing
1. Drive shaft
EV-18
0-40V
0Hz
1800W
15.3 kg
00min
-1
0 mm
4 steps (-10/-/0/ mm)
40L
IPX4
81.4dB(A), K=.0dB(A)
8.dB(A), K=.0dB(A)
.dB(A), K=4.0dB(A)
104dB(A)
4.m/s , K=1.m/s

• Wait until all the machine parts stop
completely.
• Pay attention to sharp cutting tools.
• Switch off the motor and unplug before
cleaning or maintenance, or if power cable
is damaged.
• Objects may be thrown out at high speed.
• Keep safe distance between bystanders or
pets and working area.
• Do not expose to rain or moisture.
• Remove plug from the mains immediately if
power cable is damaged or cut.