Idiomas disponibles
Idiomas disponibles
Key
Power On/Off
OK
Up and Down arrows
Quick Jump
Right and Left arrows
Main Menu
Underscore or
decimal
Backspace
Alpha-numeric
Previous menu
5.2 Status bar
A status bar is shown in the top of the display. Descriptions of the information in the status bar are
given in
Table
2.
Indicator
Time and Date
USB
Conductivity
Battery
File access
Auto zero depth
indicator
Table 1 Key description
Description
Energizes and de-energizes the meter.
Confirms an entry or highlighted menu option.
Moves up or down in the display. If the cursor is at the top or bottom of the
display, the cursor wraps to the bottom or top when the UP or DOWN
arrow is pushed.
In normal operation, this key jumps to the Select conduit shape screen. In
profiler operation, the Quick Jump key is disabled.
If the auto-zero feature is disabled, hold this key for five seconds to do a
manual zero of the depth sensor.
In Real-Time mode, the Quick Jump key toggles between the digital and
graph views.
Moves to the right or left in the display.
Moves to the Main Menu from any submenu or screen.
Puts in an underscore or decimal character. In numeric-only fields, this key
automatically puts a decimal point in the cursor position.
Moves the cursor back one space.
Puts in the key alpha or numeric value. Values are put in the order shown
on the key. After 2 seconds, the value shown in the display is stored and
the cursor advances.
Moves to the previous screen.
Table 2 Status bar indicators
Description
Shows the current time and date.
Shows when a USB cable is connected. If a USB cable is connected and
this indicator does not show in the status bar, the USB cable is not fully
engaged. Make sure that the USB cable is pushed in completely and makes
full contact with the connection port.
If the sensor is out of the water and non-conductive, a blue ring appears
next to the battery icon. If the sensor is in the water and conductive, the
indicator is a solid blue circle.
A five-bar graph shows the level of charge in the battery.
Shows while the meter gets access to a file.
If the depth sensor was zeroed in the last 30 minutes, a solid green circle
shows next to the Conductivity indicator. If the depth sensor was not zeroed
in the last 30 minutes, this indicator flashes red.
English 15
