Idiomas disponibles
Idiomas disponibles
ASSEMBLING AND ATTACHING THE STEAM MOP
i
ALWAYS attach
accessories before
turning the unit on.
CLEANING PAD
Never remove the cleaning pad while the machine is in operation or warm to the touch.
To avoid over-saturating the cleaning pad after the SteamMachine has rested for a period of time, you
i
may want expel built-up water condensation from inside the hose. Remove the cleaning pad, place
triangle mop head onto a towel and trigger the gun for a few seconds. Once the water is discharged,
attach cleaning pad and steam as you normally would.
1
Lay cleaning pad on flat surface with
cleaning side down and hook & loop
attachments facing up. The included
blue microfiber pad works best for
cleaning hard floor surfaces.
The triangle steam mop and cleaning pad are
perfect for use on these hard floor surfaces:
•
Stained concrete
•
Linoleum
•
Marble
•
Granite
8
1
Press down on the lock/release
button on the extension wand and
slide the extension wand onto the
steam mop adapter. Press firmly until
button snaps into hole.
2
Place triangle steam mop head on
top of the cleaning pad. Press steam
mop down until attached. Your steam
mop head is now ready to clean hard
floor surfaces.
•
Ceramic tile
•
Vinyl
•
Sealed hard wood
Do not use on unsealed hard wood, laminate
flooring or unglazed ceramic surfaces.
Surfaces that are not properly sealed may
Attention
be warped or damaged by exposure to
heat and moisture. Always test a small area
before beginning.
EN
2
Press down on the lock/release
button on extension and slide second
extension onto first extension. Press
firmly until button snaps into hole.
3
The optional carpet glide attachment
works with the included white pad.
The carpet glide can be snapped onto
the steam mop head and is great for
freshening carpets and killing dust
mites.
