Idiomas disponibles
Idiomas disponibles
STEAM GUN OPERATION
1
TRIGGER
ON
The steam output is controlled
through the steam handle. The
handle has both a steam trigger and
red safety switch.
For intermittent steam press the red
safety switch to the ON position. Pull
the trigger to release steam.
REBUILDING STEAM PRESSURE WHILE IN USE
1
If the orange steam light comes on
during use, it indicates the machine
needs to re-build pressure in the
tank. The machine may still be used
while pressure rebuilds.
HOT STEAM AND PARTS.
May cause injury, including skin burns or property damage. Temperatures exceed 212˚ F (100˚ C).
Burns can occur from hot water or steam.
DO NOT touch the steam nozzle or attempt to connect accessories while unit is in use.
NEVER direct the steam at a person, pet or electrical device.
6
2
For continuous steam:
(A) Start by pressing the red safety switch to the ON position and pull the trigger.
(B) Press the safety switch to LOCK. The trigger is now locked into continuous
steam mode.
To unlock from continuous steam mode, release the trigger and press
the red safety switch back to the ON position.
2
Make sure the trigger on the steam
gun is in the open position and the
switch is in the OFF position. It should
take approximately 40 seconds to re-
build pressure.
EN
