Quick SBC ADVANCED PLUS Serie Manual Del Usuario página 18

OPERATING - MAINTENANCE
GB
CONTROL PANEL
The control panel is made-up of three LEDS:
POWER LED, FLOAT LED and CHARGE LED (BULK, ABSORPTION, see fig.4)
The information supplied by the LEDS are listed below:
POWER LED
LED COLOR DESCRIPTION
No mains power - Overheating - Short circuit - Overload.
Off
In case of overheating check if the installation of the battery charge is correct.
Switch off and allow the equipment to cool down for at least 10 minutes.
Green
Power ON
FLOAT LED
LED COLOR LED STATUS
Green Fixed
Green Flashing
CHARGE LED
(BULK, ABSORPTION)
LED COLOR LED STATUS
Yellow Fixed
Yellow Flashing
MAINTENANCE
The battery charger does not need any maintenance. To ensure optimum performance from the equip-
ment, once a year check the cables and the electrical connections.
18
DESCRIPTION
- FLOAT charge
FLOAT Phase
Short circuit or overload in output.
Check output cables, the group of batteries and the points of use connected to the battery charger.
DESCRIPTION
ABSORPTION phase or BULK phase
Short circuit or overload in output.
Check output cables, the group of batteries and the points of use connected to the battery charger.