Enlaces rápidos
9979015COM
Closet Storage Tower
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-866-452-4081 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.systembuild.com
Easy
Assembly Difficulty Meter
For the latest information on SystemBuild products
follow us at Ameriwood Home
B349979015COM0
Tough
You
Tube
Manuales relacionados para System Build 9979015COM
Resumen de contenidos para System Build 9979015COM
- Página 1 9979015COM Closet Storage Tower B349979015COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-866-452-4081 (toll free) Monday-Friday 9am - 5pm CST Visit: www.systembuild.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-866-452-4081 Monday-Friday 9am - 5pm CST Tube Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR...
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
- Página 4 Board Identification Not actual size Lower Left End Panel Lower Right End Panel Upper Left End Panel Upper Right End Panel 39979015030 39979015040 36860015010 36860015020 Adjustable Shelf Apron Divider 36860015080 36860015070 36860015060 36860015050 Lower Fixed Shelf Center Shelf Fixed Shelf Upper Fixed Shelf 36860015100 36860015110...
- Página 5 Board Identification Not actual size Bottom 36860015170 Upper Back Panel Lower Back Panel K686001500 K686001510 systembuild.com Tube...
- Página 6 Board Identification Not actual size These pieces are paperboard construction. They are not made from wood, but are required for the assembly of your unit. systembuild.com Tube...
- Página 7 Part List Actual Size #A80250 #A12120 #A53510 #A22610 #A22620 Shelf Support 7/16" Pan Head Angle Bracket Cam Bolt Cam Lock #A12700 #A21660 #A21110 #A20940 7/8" Pan Head Wood Dowel Nail Wall Anchor #A23030 #A13020 2" Flat Head 1-1/4" Pan Head systembuild.com Tube...
- Página 8 Part List Not Actual Size #A84050 Wall Anchor Kit #I20630 Telescoping Tube systembuild.com Tube...
- Página 9 STEP 1 (x1) (x3) (x6) #A84050 #A53510 #A12120 systembuild.com Tube...
- Página 10 STEP 2 (x4) #A22610 #A21660 & systembuild.com Tube...
- Página 11 STEP 3 Quick Assembly (x4) (x4) Proper orientation of CAM LOCK #A22620 #A21660 systembuild.com Tube...
- Página 12 STEP 4 (x3) (x4) (x6) #A53510 #A22610 #A12120 systembuild.com Tube...
- Página 13 STEP 5 finished edges facing up systembuild.com Tube...
- Página 14 STEP 6 (x8) #A23030 systembuild.com Tube...
- Página 15 STEP 7 Quick Assembly (x2) (x6) (x2) Proper orientation of CAM LOCK #A22620 #A22610 #A21660 systembuild.com Tube...
- Página 16 STEP 8 Quick Assembly (x2) (x6) (x2) Proper orientation of CAM LOCK #A22620 #A22610 #A21660 systembuild.com Tube...
- Página 17 STEP 9 Quick Assembly (x8) (x8) #A22620 #A21660 Proper orientation of CAM LOCK systembuild.com Tube...
- Página 18 STEP 10 (x4) #A21660 (x2) systembuild.com Tube...
- Página 19 STEP 11 (x3) (x4) (x6) (x4) #A53510 #A22620 #A12120 #A21660 Quick Assembly Proper orientation of CAM LOCK systembuild.com Tube...
- Página 20 STEP 12 (x2) #A23030 finished edge systembuild.com Tube...
- Página 21 STEP 13 (x2) #A23030 finished edge finished edge systembuild.com Tube...
- Página 22 STEP 14 systembuild.com Tube...
- Página 23 STEP 15 systembuild.com Tube...
- Página 24 STEP 16 systembuild.com Tube...
- Página 25 STEP 17 2 people are required for this step. Carefully turn the unit over onto its front side as shown. Assure that the unit is square. Distance from corner to corner must be equal as shown. (x49) #A21110 Align the upper back panel with the top of the unit. Align the side edges with the edge of the left upper end panel (A) and right upper end panel (B) and nail straight into the back edges as shown.
- Página 26 STEP 18 (x4) (x8) #I20630 #A12700 (x8) (x8) #A13020 #A20940 First, locate your closet rods where you would like to position them in-line with the holes in the unit and mark hole locations on the wall. Next, If you are using the anchors to fasten the closet rods, insert them into the wall securely by screwing them into the wall using a screwdriver.
- Página 27 STEP 19 (x4) #A80250 systembuild.com Tube...
- Página 28 STEP 20 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) #A84050 IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Página 29 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 lbs each 22.7 kg each 40 lbs 18.2 kg 50 lbs each 22.7 kg each 20 lbs 9.1 kg Warning: Risk of injury to persons - do not place a television on this furniture.
- Página 30 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 31 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-866-452-4081 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 32 Español Página 25 Se necesitan dos personas para realizar este paso. Dé la vuelta a la unidad con cuidado para colocarla de manera frontal como en la imagen. Asegúrese de que la unidad tenga forma cuadrada. Las distancias entre esquinas deben ser iguales. Alinee el panel trasero superior con la parte superior de la unidad.
- Página 33 Español OPCION 1: Para asegurar en una viga de la pared (método preferido). Use un detector de vigas, localice la viga en la pared. Coloque la unidad contra la pared y alinee con el soporte de seguridad en esta ubicación. Para hacer este proceso más fácil, se puede perforar un agujero piloto de 1/8"...
- Página 34 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-866-452-4081 (sans frais) du Lundi au Vendredi de 9h à...
- Página 35 Français Page 25 Deux personnes sont requises pour cette étape. Pivoter prudemment l'assemblage sur son devant tel que démontré. S'assurer que l'assemblage est égalisé. La distance d'un coin à l'autre doit être équivalente tel que démontré. Aligner le panneau arrière supérieur au dessus de l'appareil. Aligner les bords latéraux avec le bord du panneau d'extrémité...
- Página 36 Français OPTION 1: Fixation sur un montant mural (méthode préférée) En utilisant un détecteur de montants, locaiiséune planche dans le mur. Placez votre appareil contre le mur, avec le support de sécurité aligné à cet endroit. Pour rendre la conduite de la vis plus facile, vous pouvez percer un trou pilote de 1/8"...