Vacuum Cleaner Description - Labels; Accessories; Packing And Unpacking; Setting To Work - Connection To The Power Supply - Blastrac BDC-1216 Manual De Instrucciones

- Vacuum cleaner description - Labels

See fi g. 1.
A - Identifi cation plate: Code of the model,
technical specifi cations, serial number, year of
manufacture
B - Dust container
C - Fastening latches
D - Handle
E - Inlet
F - Exhaust
G - Attention plate for fi lter shaking
H - Panel power plate
I - Attention plate for the vacuum cleaner's use
L - Prohibition plate for no vacuuming of
combustible or dangerous materials
M - Model plate
This vacuum cleaner creates a strong air fl ow which is
drawn in through the inlet (E) and blows out through
the outlet (F). Before turning on the vacuum cleaner, fi t the vacuum
hose into the inlet and then fi t the required tool on to
the end part (refer to the manufacturer's accessory
catalogue or Service Center). This vacuum cleaner is
equipped with an internal baffl e plate which subjects
the vacuumed substances to a circular centrifugal
movement that makes them drop into the container.
The vacuum cleaner is equipped with a main fi lter
which enables it to be used for the majority of
applications.

- Accessories

Various accessories are available; refer to the
manufacturer's accessory catalogue.
ATTENTION DANGER !
Use only genuine accessories supplied and
authorized by the manufacturer.

- Packing and unpacking

Dispose of the packing materials in compliance with
the laws in force.
- Cardboard box packing (fi g. 2)
Model
A (in)
B (in)
C (in)
lbs
- Setting to work - connection to the power
supply
ATTENTION DANGER !
-
Make sure that the vacuum cleaner is off.
-
Make sure that the vacuum cleaner is in perfect
condition before starting work.
-
Before plugging the vacuum cleaner into the
electrical mains, make sure that the voltage
rating indicated on the data plate corresponds
to that of the electrical mains.
-
Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
-
The plugs and connectors of the connection
cables must be protected against splashed
water.
-
Make sure that connections to the electrical
mains and plug are correct.
-
Use the vacuum cleaners only when the
connection cable to the electrical mains are in
perfect condition (damaged cables could lead to
electric shock!).
-
Regularly check that the electric cable does not
show signs of damage excessive wear, cracks
or ageing.
ATTENTION DANGER !
When the vacuum cleaner is operating, do not:
-
Crush, pull, damage or tread on the cable that
connects to the electrical mains.
-
Only disconnect the cable from the electrical
mains by removing the plug (do not pull the
cable).
-
Only replace the electric power cable with one
of the same type as the original.
-
The cable must be replaced by the
manufacturer's Service Center staff or by
equivalent qualifi ed personnel.
– 3 –
BDC-1216 BDC-1324
26.8 26.8
24.0 24.0
41.5 41.5
88.0 90.0
US