Idiomas disponibles
Idiomas disponibles
(Figure 13). For a larger cup, push the adjustable
coffee spout up to accommodate the size.
4. Press the
button (Figure 16) to select the
ground coffee function. The button will illuminate
indicating that the function has been selected and
the coffee grinder has been disabled.
5. Press the
button (Figure 14) to make one cup of
espresso / coffee.
6. The machine will now run a short pre-brewing cycle, pause and then
complete the delivery.
Note: While the machine is preparing the espresso / coffee, the
delivery can be terminated at any time by pressing the
(Figure 14).
7. Once the desired quantity is reached, the machine will
automatically terminate espresso / coffee delivery and discharge the
grounds into the used coffee container. Note: There is no need to
empty the used coffee container until the used coffee container
warning light illuminates. (For more details on this light, please refer to
the Troubleshooting section of the manual).
Caution: While the machine is delivering espresso / coffee, never
remove the water tank. If it is removed, the machine will not be able
to make espresso / coffee and will become noisy.
8. Once the espresso / coffee has been delivered, to make
espresso/coffee using pre-ground coffee again, add again one level
measure of pre-ground coffee and then press the 1-cup button.
9. To make espresso / coffee using whole coffee beans again: First
press the
button to deactivate the ground coffee function and
enable the coffee grinder. Then make sure that the coffee grinder is
full of coffee beans. Press the 1-cup or 2-cup button depending on
how much espresso / coffee you want to brew.
10. To switch the machine off, press the
switching off, the machine will automatically run a rinse cycle. A little
hot water will release from the coffee spout and collect in the
removable drip tray.
11. Use caution when removing the contents of the drip tray, as they
may be very hot. Allow contents to cool, and then remove the drip
tray and discard the water.
12. If the machine is not switched off using the
itself off and run a brief rinse cycle 3 hours after the last operation.
19
Figure 16
button
button. Note: Before
button, it will switch
