Idiomas disponibles
Idiomas disponibles
Bluetooth
Operating frequency band
Max. transmission power
A) For measurements from the front edge of the measuring tool, applies to high
reflectivity of the target (e.g. a white-painted wall), weak backlighting and 25°C
operating temperature. In addition, a deviation of ±0,05mm/m must be taken
into account.
B) For measurements from the front edge of the measuring tool, applies to high
reflectivity of the target (e.g. a white-painted wall), and strong backlighting. In
addition, a deviation of ±0.15 mm/m must be taken into account.
C) After calibration at 0° and 90° with an additional pitch error of max. ±0.01°/
degrees up to 45°. The measurement accuracy is related to the 3 orientations
based on the calibration of the inclination (tilt measurement), see picture H.
D) At 25°C operating temperature.
E) In the continuous measurement function, the maximum operating temperature
is +40°C.
F) When using Bluetooth
connection depending on the model and operating system. Bluetooth
must support the GATT profile.
G) Automatic switch-off of the measuring tool is adjustable after 2, 5, 10 minutes
or never.
H) The left-hand side of the measuring tool serves as the reference level for grade
measurement.
A long battery runtime is achieved by means of energy-saving measures, such
as deactivating the Bluetooth
brightness, etc.
The measuring tool can be clearly identified with the serial number 15 on the type
plate.
2610049010 04-18 GLM400C.indd 19
®
®
Low Energy tools, it may not be possible to establish a
®
function when not required, or reducing the display
®
Bluetooth
(4.1 low-energy)
2402 – 2480 MHz
F)
8 mW
®
devices
19
4/6/18 8:20 AM
