Idiomas disponibles
Idiomas disponibles
Accessories Included
1� Easy removal mounting bracket system�
2� Microphone bracket system�
3� All main-unit and microphone mounting hardware needed for normal installation�
4� Plug-in microphone with coil cord�
5� FCC part 95, Subpart D�
6� Owner's Manual�
Where to Locate your CB Transceiver
Your new Midland CB is designed to be installed under the dash or vertically on a
console of your vehicle� Safety and convenience are the primary considerations in
deciding exactly where to locate your radio�
Caution: Be sure that the unit is located so that it does not interfere with the driver,
supplemental restraint systems (air bags) or impair access to any controls� Connecting
cables must be routed and secured in such a manner as not to interfere with the
operation of the brake, accelerator or other controls� Interference from either the unit or
connecting cables may contribute to the loss of control of the vehicle�
Mechanical Mounting
1� Heeding the caution, use the mounting bracket as a template for marking the
location of screw holes under the dash� Use an awl, nail or other sharp pointed
object to mark the hole locations�
2� Drill a 1/8" hole for each screw hole in the mounting bracket� Attach the bracket to
the dash with the Phillips head sheet metal screws provided�
Extreme care should be exercised when drilling into the dash to avoid
damage to under-dash electronic ignition, cruise control, instrument and /
or accessory wiring�
3� Position the main unit between the bracket arms in line with the retention knobs� Set
the angle for optimum operating, comfort and accessibility�
4� Tighten the retention knobs�
www.midlandradio.com
3
