Hamilton Beach HMD300 Manual De Uso página 4

Installation
1. Remove mounting bracket from the back of the
mixer.
2a. If mounting directly into a wall stud, drill 5/32"
pilot holes and then screw three of the screws
provided through the three centered holes on
the mounting bracket.
2b. If mounting into drywall, drill 1/4" pilot
holes and then insert the six drywall anchors
provided into the wall. Align the six holes on
the outside of the mounting bracket with the
drywall anchors, and then screw six of the
screws provided through the holes.
4
3. Place drink mixer back onto mounting bracket
by inserting posts back into the appropriate
holes on the back of the mixer and sliding the
mixer down to lock into place.
4. Tighten the thumbscrew at the top of the
mounting bracket to secure the mixer.