Idiomas disponibles
Idiomas disponibles
BLUETOOTH®
To
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes
Improve the voice quality
While talking on the phone....
1
Press and hold
.
2
Turn the volume knob to select an item (see the following table), then press
the knob.
3
2
Repeat step
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
On the faceplate
On the remote control
Press and hold
Press and hold
or
the volume knob.
( Not available )
Press
.
Turn the volume knob
( Not available )
during a call.
• This adjustment will not
affect the volume of the
other sources.
( Not available )
Press
during a call.
• Operations may vary
according to the
connected Bluetooth
device.
.
MIC LEVEL
–10 — +10 (–4): The sensitivity of the microphone increases
as the number increased.
NOISE RDCT
–5 — +5 (0): Adjust the noise reduction level until the least
.
noise is being heard during a phone conversation.
ECHO CANCEL
–5 — +5 (0): Adjust the echo cancellation delay time until the
least echo is being heard during a phone conversation.
Make the settings for receiving a call
1
Press
to enter Bluetooth mode.
2
Turn the volume knob to select an item (see the following
table), then press the knob.
3
2
Repeat step
activated.
To return to the previous setting item, press
SETTINGS
AUTO ANSWER
01 SEC — 30 SEC: The unit answers incoming call
automatically in the selected time (in seconds). ;
OFF: Cancels.
RING ILLUMI
BLINK 1 — BLINK 5 (BLINK 2): Selects the notification
blinking pattern for the buttons when there is an incoming
call. ; OFF : Cancels.
until the desired item is selected or
ENGLISH
Default: XX
.
Default: XX
13
