Axis P1354-E Guia De Instalacion página 22

AXIS P13-E Series
6
1
Network connector (PoE OUT, connected at delivery)
2
Cable holes
3
Network connector (PoE IN)
4
LED indicator
5
Arctic Temperature Control switch
6
Alarm output (connected at delivery)
1. Optionally insert an SD memory card (not included) into the SD card slot. A standard or
high capacity SD card is required to store images locally in the camera.
2. Optionally connect external input/output devices. See Connectors on page 16 for
information on the connector pins. See Route the Network Cable Through the Cable Hole
on page 19 for information on preparing the network cable. Route the cables through
the cable holes into the bottom cover and to the camera.
3. Connect the camera to the network using a shielded network cable and using the
network connector (PoE IN) on the bottom cover. The network cable and the I/O cable
between the bottom cover and the camera, are already connected at delivery.
4. Check that the indicator LEDs indicate the correct conditions. See LED Indicators on
page 12 for further details.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from www.axis.com/techsup
5 4
22
1
3
2