Miniland thermotalk plus 89068 Manual Del Usuario página 41

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
a Field strengths from fixed RF transmitters, such as base stations for radio (cellular/cordless) telephones
and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted
theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the location in which
device is used exceeds the applicable RF compliance level above, device should be observed to verify
normal operation. If abnormal performance is observed, additional measures may be necessary, such as
re-orienting or relocating device.
b
Over the frequency range 0.15 MHz to 80 MHz, field strengths should be less than 3 V/m.
portable and mobile RF communications equipment and device
The device is intended for use in an electromagnetic environment in which radiated RF disturbances are con-
trolled. The customer or the user of device can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and device, as
recommended below, according to the maximum output power of the communications equipment.
Rated
maximum
output
power of
0,15 MHz to 80 MHz
transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in meters (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
8. BATTERY & PRODUCT DISPOSAL INFORMATION
• Remember to dispose of the product responsibly.
• Do not mix products bearing the crossed -out bin symbol with your
general household waste.
• For the correct collection and treatment of these products take
them to the collection points designated by your local authority.
Alternatively contact the retailer who sold you the product.
Recommended separation distances between
Separation distance according to frequency of transmitter
80 MHz to 800 MHz
0,12
0,38
1,2
3,8
12
m
0,12
0,38
1,2
3,8
12
41
80 MHz to 2,7 GHz
0,23
0,73
2,3
7,3
23
loading

Este manual también es adecuado para:

Th2071