Idiomas disponibles
Idiomas disponibles
When Network wizard is selected, the unit will scan the available wireless network.
After scanning, the wireless network name list will appear, select one and try to connect.
Refer to page 7.
1.
When PBC Wlan setup is selected, the unit will scan the available wireless network.
Refer to page 15.
When View settings is selected, you can check the "Active connection", "MAC address",
"Wlan region", "DHCP", "SSID", "IP address", "Subnet mask", "Gateway address", "Primary
DNS" and "Secondary DNS".
When Wlan region is selected, refer to page 7.
2.
In System settings menu, if Time/Date is selected, the screen will appear as below.
3.
In System settings menu, if Language is selected, select one to set the interface
language.
4.
In System settings menu, if Factory Reset is selected, set it to "YES" to proceed, set it to
"NO" to cancel factory reset.
5.
In System settings menu, if Setup wizard is selected, refer the operation to Page 11-17.
6.
In System settings menu, if Info is selected, you can check the "SW version", "Radio ID"
and "Friendly Name".
7.
In System settings menu, if Backlight is selected, the screen will appear as below.
32
