Roland VS-1880 Manual De Usuario página 124

Aplicación MIDI
GDEFERRED PLAY(MCS)
Status Data Bytes
F0H 7FH,Dev,06H,03H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
03H DEFERRED PLAY (MCS)
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH,
the VS-1880 goes into the playback condition after the locate operation.
If the transport switch [PLAY] was pressed, the VS-1880 transmits as the device ID 7FH.
GFAST FORWARD(MCS)
Status Data Bytes
F0H 7FH,Dev,06H,03H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
03H DEFERRED PLAY (MCS)
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH,
the VS-1880 goes into the fast forward condition.
The VS-1880 does not transmit the message.
GREWIND(MCS)
Status Data Bytes
F0H 7FH,Dev,06H,05H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
05H REWIND (MCS)
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH,
the VS-1880 goes into the rewind condition.
The VS-1880 does not transmit the message.
GRECORD STROBE
Status Data Bytes
F0H 7FH,Dev,06H,06H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
06H RECORD STROBE
F7H
EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH,
the VS-1880 goes into the following condition.
1. The VS-1880 is in the playback condition. Start Recording the tracks that status
are the record standby mode.
2. The VS-1880 is in the stop condition. Start Playing back, and Start Recording
the track that status are the record standby mode.
124
Status
F7H
Status
F7H
Status
F7H
Status
F7H
If the transport switch [REC] was pressed out of the recording condition, the VS-1880
transmits as the device ID 7FH.
GRECORD EXIT
Status Data Bytes
F0H 7FH,Dev,06H,07H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
07H RECORD EXIT
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH, the VS-
1880 exits from the record condition.
If the transport switch [REC] was pressed while recording, the VS-1880 transmits as the
device ID 7FH.
GMMC RESET
Status Data Bytes
F0H 7FH,Dev,06H,0DH
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
0DH MMC RESET
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH,
the VS-1880 resets all communication channels related with MMC.
When powered on the VS-1880 transmits as the device ID 7FH.
GWRITE
Status Data Bytes
F0H 7FH,Dev,06H,40H,ccH,ddH,eeH,,,ffH,,,
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
40H WRITE
ccH Information Bytes follows the command
ddH The name of the writable Information Field
eeH Information Field Format
: :
ffH Field names and data
: :
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH,
the VS-1880 writes the data to the specified information field.
The VS-1880 does not transmit the message.
GMASKED WRITE
Status
Data Bytes
F0H 7FH,Dev,06H,41H,04H,ddH,eeH,ffH,ggH
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
41H MASKED WRITE
04H Number of Bytes follows the command
Status
F7H
Status
F7H
Status
F7H
Status
F7H