DieHard 28.71239 Manual Del Usuario página 11

Cargador de baterías 6v y 12v/mantenedor
Ocultar thumbs Ver también para 28.71239:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

5. Connect the cable to the end of the charger output cord.
Take care to keep the wires and plug away from metal and moving parts.
6. Plug the charger power cord into a grounded 120V AC electrical wall outlet.
12V ACCESSORY PLUG QUICK-CONNECT
Charge or maintain your battery without lifting the hood.
1. Connect the end of the 12V accessory plug quick-connect to the charger.
2. Insert the 12V accessory plug into the 12V accessory outlet.
3. Route the power cord from the charger through the vehicle's open window.
4. Plug the charger power cord into a grounded 120V AC electrical wall outlet.
5. If the vehicle's ignition key has to be on in order for the accessory outlet to
supply/receive power, turn the key, without starting the engine.
BATTERY CHARGING TIMES
CCA = Cold Cranking Amps
BATTERY SIZE/RATING
SMALL BATTERIES
Motorcycle, garden tractor, etc.
CARS AND
TRUCKS
MARINE/DEEP-CYCLE
Times are based on a 50% discharged battery and may change, depending on
age and condition of battery.
AUTOMATIC CHARGING MODE
When an automatic charge is performed, the charger switches to the maintain
mode automatically after the battery is charged.
BATTERY CONNECTION INDICATOR
If the charger does not detect a properly connected battery, charging will not
start and the digital display will show one of two messages. If the display shows
CONNECT CLAMPS, make sure the charger is connected to the battery and the
connection points are clean and making a good connection. If the display shows
RC = Reserve Capacity
200-315 CCA
315-550 CCA
550-1000 CCA
• 11 •
Ah = Amp Hour
CHARGE TIME
6-12 Ah
12-32 Ah
40-60 RC
60-85 RC
85-190 RC
80 RC
140 RC
160 RC
180 RC
(3A)
1½-2½ h
2½ -7 h
7½ -9½ h
9½ -12 h
12-23 h
12 h
18 h
20 h
22 h
Tabla de contenido

Solución de problemas

loading

Tabla de contenido