Idiomas disponibles
Idiomas disponibles
7
8
Low voltage
9
Overheated geared motor or PCB
10
PCB communication error
11
PCB error
12
Phase detection failed
13
Software damage
(Table 2)
Audible tone notifications
Beeps
1 time (beep)
1 time – prolonged (beeeep)
2 times (beep-beep)
2 times (beep-beep)
3 times (beep-beep-beep)
3 times (beep-beep-beep)
3 times (beep-beep-beep)
152
Pruning shears Titania E-40 TP
1. Recharge the battery
2. Replace the battery
Wait until the temperature drops below 75 degrees
to remove the over-temperature protection
Replace the PCB
Ensure that the cables are correctly connected
Replace the PCB
Replace the PCB
Description
Switch on
Activation / deactivation of the anti-cut finger protection system
Maximum blade opening switch
Safety blade lock activation
Safety blade lock deactivation
Standby
Automatic switch off
Art. 315
Art. 315
Pruning shears Titania E-40 TP
Usage
Cleaning and maintenance
Components of the tool box
Tool
Wrench
Allen wrench
Screwdriver
Sharpening corundum stone
For further information about the product, please contact [email protected]
When carrying out cleaning and maintenance operations, always make sure that the
shears are switched off, the battery is disconnected and the blades are closed.
Function
Fastening the blade
Unlocking the anvil locking bolt
Unscrewing all screws of the machine body
Blade sharpening
8
153
