Idiomas disponibles
Idiomas disponibles
7
10. At the time of delivery, the battery of this product is not fully charged. Therefore, the
user must fully charge it before using it for the first time. For the first charge cycle, we
recommend that the user charge for 2 hours. Insert the battery into the base and plug the
charger into the power outlet.
11. After the battery is fully charged, unplug the charger from the power supply and the
device.
12. Charging time is about 2 hours after the battery is completely discharged. Do not charge
the battery for an extended period as this will damage the battery.
148
Art. 315
Pruning shears Titania E-40 TP
Usage
Art. 315
Pruning shears Titania E-40 TP
Usage
Operating notes
When using this device, wear suitable clothing and work gloves. The risk
of injury can be reduced by wearing a protective device and ensuring that
the device is functioning properly.
Make sure the device is functioning properly before each use. The start/off
switch and safety switch must be in working use. If the switch is loose, the
power must be turned off. If the switch is damaged, stop using the device.
Ensure that the voltage of the power supply is consistent with the voltage
on the device nameplate.
Make sure the scissors work properly to ensure that the electric scissors
work in an optimal state.
When the device is turned off, the blade will continue to run for some
time. Wait for the blade to stop. Do not touch or block moving blades.
Otherwise, it will cause danger!
For further information about the product, please contact [email protected]
7
149
