Concept VR2010 Manual De Instrucciones página 42

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
ACKNOWLEDGMENT
Thank you for purchasing a Concept product. We wish you much joy with your new appliance every day you use it.
Please read the instruction manual carefully before initial use. To refer to this manual any time you need to, we
recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.
Technical specifications
Voltage
220–240 V ~ 50/60 Hz
Input
20 W
Sound level
<60 dB
Frequency band
2400-2483.5 MHz
Transmitter output power (max.)
17 dBm
IMPORTANT
Before connecting to the mains, make a visual check to ensure that the unit is intact and
that no damage occurred during transport.
IMPORTANT SAFETY PRECAUTIONS
• Do not use the appliance in any other way than as described in this manual.
• Remove all the packaging and marketing materials before first use.
• Remove all items from the floor from the floor that could disrupt the effective a trouble-
free cleaning (cables, papers, clothes, table cloths and curtains touching the ground)
• If there are stairs in the cleaning area, place a magnetic strip (virtual wall) at a minimum
distance of 15 cm from the top edge. This distance should ensure the highest protection
against falling from the stairs.
• Use only original accessories and spare parts for this model
• Do not sit on the vacuum robot or place other objects on it
• The appliance should only be used in households at temperatures between 0 °C and 40 °C.
• Make sure that the dust bin and mopping cloth are properly attached before use.
• Do not put your hair, clothes, fingers or other body parts near the main brush. Keep the
main brush and the suction part of the vacuum robot clean, remove all hair and dust that
can lower the suction properties of the vacuum robot and the cleaning quality.
• Do not use the appliance on wet or damp floors.
• Do not vacuum liquids, burning cigarettes, splinters and sharp objects, matches and
other flammable substances, larger pieces of paper, plastic bags or other items that can
damage the vacuum robot.
• Do not allow the vacuum robot to pass over loose cables when vacuuming.
VR2010
EN
83
loading