Makita XBU01 Manual De Instrucciones página 2

Ocultar thumbs Ver también para XBU01:
Idiomas disponibles

Idiomas disponibles

ENGLISH (Original instructions)
SPECIFICATIONS
Capacities
No load speed (RPM)
Overall length
Standard battery cartridge(s)
Warning: Use only the battery(ies) described.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
IMPORTANT SAFETY
INSTRUCTIONS
When
using
an
precautions should always be followed, including
the following:
READ ALL INSTRUCTIONS.
BEFORE USING THIS
APPLIANCE
WARNING - To reduce the risk of fire, electric shock,
or injury:
1.
Do not leave appliance when battery fitted.
Remove battery from appliance when not in
use and before servicing.
2.
Do not expose to rain. Store indoors.
3.
Do not allow to be used as a toy. Close
attention is necessary when used by or near
children.
4.
Use only as described in this manual. Use only
manufacturer's recommended attachments.
5.
Do not use with damaged battery. If appliance
is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water,
return it to a service center.
6.
Do not put any object into openings. Do not use
with any opening blocked; keep free of dust, lint,
hair, and anything that may reduce air flow.
7.
Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
8.
Use extra care when cleaning on stairs.
Model
Air volume (HIGH)
Air volume (LOW)
HIGH
LOW
(without long nozzle)
(with long nozzle)
Net weight
Rated voltage
electrical
appliance,
2.6 kg (5.9 lbs)
BL1815N / BL1820
USA018-2
9.
Use only the charger supplied by the
manufacturer to recharge.
SAVE THESE INSTRUCTIONS.
This appliance is intended for commercial use.
basic
BLOWER SAFETY WARNINGS
1.
Always use protective goggles, a cap and
mask when using the blower. Ordinary eye or
sun glasses are NOT safety glasses.
2.
Never point the nozzle at anyone in the
vicinity when using the blower.
3.
Never block suction inlet and/or blower outlet.
Do not block suction inlet or blower outlet
to clean up in dusty areas.
Do not use the blower with a tapered
nozzle smaller than the original one, such
as a new nozzle obtained by attaching an
extra diameter-reduced hose or smaller
hose to the nozzle top end.
Do not Use the blower to inflate balls,
rubber boat or the similar.
Increased motor revolution may cause dangerous
fan breakage and result in serious personal injury.
Heated motor and control circuit may cause a fire.
4.
AVOID UNINTENTIONAL STARTING. Do not
carry battery fitted tool with finger on switch.
5.
Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
SAVE THESE INSTRUCTIONS.
2
XBU01
3
4.4 m
/min (155 cu.ft./min)
3
2.6 m
/min (92 cu.ft./min)
17,000 /min
10,000 /min
420 mm (16-1/2")
905 mm (35-5/8")
3.1 kg (6.9 lbs)
D.C. 36 V
BL1830 / BL1840 / BL1850
USB101-2
loading