Idiomas disponibles
Idiomas disponibles
FocusPRO
Thermostat Installation Guide
®
4
Mount thermostat
3/16" holes for drywall
7/32" holes for plaster
Wall anchor
Detach wallplate
Replacing system components
To replace a thermostat, install batteries and follow the procedures on page 2 to link it to
the wireless network. If necessary, modify settings as needed (see tables on pages 4-6).
After installing a new EIM or zone panel, you must re-set the thermostat to communicate
with the new EIM or zone panel, as described below.
1 Press and hold the thermostat's FAN and s buttons for 3 seconds.
2 Press BACK twice to display Function 39 (wireless setup).
3 Press t to change Function 39 setting to 0 (disconnect from old system).
4 Follow the procedures on page 2 to relink to new system.
www.resideo.com
© 2022 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.
Tous droits réservés. La marque de commerce Honeywell Home est utilisée avec l'autorisation d'Honeywell International, Inc. Ce produit est fabriqué par Resideo
Technologies, Inc. et ses sociétés affiliées.
Todos los derechos reservados. La marca comercial Honeywell Home se utiliza bajo licencia de Honeywell International, Inc. Este producto es fabricado por Resideo
Technologies, Inc. y sus afiliados.
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
1-800-468-1502
69-2092EFS—11 M.S. Rev. 07-22 | Printed in United States
Wallplate
Mounting screw
M28490
