Idiomas disponibles
Idiomas disponibles
WARNING:
Only perform cleaning and maintenance work
according to these instructions!
All further works must be performed by a
qualified specialist!
WARNING:
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Make sure the trigger is locked and battery
pack is removed before performing any
procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL
FAILURE:
Do not use damaged equipments.
If abnormal noise or vibration occurs, have
the problem corrected before further use.
There are no user-serviceable parts in your power tool.
If any of following condition are found, stop using it and
send it to the authorized service center for repair.
• leaking, swollen, or cracked battery pack
• loose hardware
• misalignment or binding of accessories.
• cracked or broken parts.
• any other condition that may affect its safe operation.
CLEANING
1. Clean dust and debris from air vents.
2. Keep handle clean, dry and free of oil or grease.
3. Make sure the collet is free of chips and sawdust.
4. Remove stubborn dirt from housing with high pressure
air (max. 3 bar).
NOTE:
Do not use chemical, alkaline, abrasive or other aggressive
detergents or disinfectants to clean this product as they
might be harmful to its surfaces.
EN - 16
MAINTENANCE
TRANSPORTATION
1. Only carry by its handle.
2. Remove or cover the blade during the transport.
3. Protect from any heavy impact or strong vibrations
which may occur during transportation in vehicles.
4. Secure to prevent it from slipping or falling over.
STORAGE
1. Clean thoroughly as described above.
2. Store in a dark, dry, frost-free and well-ventilated area
that is inaccessible to children. The ideal storage
temperature is between 50°F(10°C) and 86°F(30°C).
3. Use original package for storage or cover with a suitable
cloth to protect it against dust.
To prolong battery life, store the battery pack separately
from the tool in a 30%-50% charged condition. It's
recommended to have your battery pack charged at least
every 6 months.
DISPOSAL
Waste product should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling
advice.
Chips or sawdust may produced by the tool during
operation, users should clean these objects to protect
environment.
NOTE:
Electrical products should not be discarded with
household products. Used electrical products
must be collected separately and disposed of at
collection points provided for this purpose. Talk
with your local authorities or dealer for advice
on recycling.
WWW.SENIXTOOLS.COM
