Chicago Pneumatic CP3119-123X Manual Del Usuario página 4

6159949830
Issue n° 01
Series C
a work place situation over which we have no
control.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
An EU guide to managing hand-arm vibration
can be found at http://www.humanvibration.com/
EU/VIBGUIDE.htm
We recommend a programme of health
surveillance to detect early symptoms which
may relate to noise or vibration exposure, so
help prevent future impairment.
DISASSEMBLY AND REASSEMBLY
INSTRUCTIONS
Disconnect the machine from the
compressed air supply. Remove all
accessories.
DISASSEMBLING THE TURBINE:
● Remove the turbine from the housing (15),
● Extract the lock ring (27),
● Unscrew the speed governor (16).
●
CLAMP THE ROTOR SLIGHTLY IN A VICE
FITTED WITH LEAD JAWS, then unscrew the
item (29).
Reassembling the turbine:
● Proceed in reverse order with respect to
disassembly.
Be careful with the direction for
assembling the blades.
Apply a small quantity of "Loctite 243" on the
thread of the governor (16) before tightening it to
a torque of 2 N.m. Make sure that the turbine is
1
4 / 33
2 3 4
09/2011