Echo PB-255ES Manual De Instrucciones página 16

Idiomas disponibles

Before you start

Assembly

Read the operator's manual carefully to ensure that you assemble the product correctly.

Never perform maintenance or assembly procedures with engine running.

Using a product that has been incorrectly assembled could lead to an accident or serious injury.

Install blower pipes

1. Locking ring

1. Blower pipe(main pipe)

WARNING

2. Blower pipe(fan head

nozzle)

Before you start

Stand unit upright on blower base.

Release locking ring with a coin or screwdriver, and rotate so

that lock symbol (A) is at top of ring.

Align locking ribs (C) on the blower pipe(main pipe) with re-

cesses (B) in locking ring, and slide the blower pipe(main

pipe) into locking ring.

After pushing upper blower all the way in fan case so that

line (D) will meet locking ring, rotate locking ring clockwise

1/8 turn to lock the blower pipe(main pipe) in place.

NOTE

Blower use will eventually loosen pipe connections. Exclusive

positive locking system allows pipes to be tightened. If loosen-

ing occurs, remove the blower pipe(fan head nozzle) and in-

stall according to instructions 5 & 6.

Align tabs (F) with grooves (E) and slide the blower pipe(fan

head nozzle) over the blower pipe(main pipe) until there is

light resistance.

Assemble the blower pipe(fan head nozzle) onto the blower

pipe(main pipe) until you feel light resistance. Do not force

connection. Hold the blower pipe(main pipe), and turn the

blower pipe(fan head nozzle) clockwise, engaging positive

locking channels until connection is firm. Do not force con-

nection.