HQ-Power VDPLOW1212RGBWP Manual Del Usuario página 7

number. Changing the settings of one channel will only affect the device in question.
Start address
Use the table below to define the correct address. The table shows the settings for units 1 to 3. Apply the
same principle for the other units.
channel mode
start address
5
channel
start address
9
channel
DMX Channel Values
5-channel mode:
channel
1
2
3
4
5
9-channel mode:
channel
1
2
3
4
5
6
7
8
9
8. Cleaning and Maintenance
•
All screws shall be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) shall not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
V. 02 – 17/10/2014
VDPLOW1212RGBWP
first unit second unit
1 6 (1 + 5)
1 - 5 6 - 10
1 10 (1 + 9)
1 - 9 10 - 18
function
R
G
B
W
UV
function
dimmer
strobe
R
G
B
W
UV
macro
fade
third unit
11 (6 + 5)
11 - 15
19 (10 + 9)
19 - 27
from to description
000 255 red
000 255 green
000 255 blue
000 255 white
000 255 UV
from to description
000 255 dimmer on/off
000 255 strobe from slow to fast
000 255 red
000 255 green
000 255 blue
000 255 white
000 255 UV
000 009 no function
010 034 R (fade in)
035 064 R + G (fade in)
065 094 R (fade out) + G
095 097 G
098 127 G + B (fade in)
128 157 G (fade out) + B
158 160 B
161 190 B + R (fade in)
191 225 R + B + G (fade in)
226 255 R + G + B + W (fade in) + UV (fade in)
000 239 fade in and out
240 255 sound
7
highest start address
508
504
©Velleman nv