Oster BLSTRM-DR0 Manual De Instrucciones página 9

Idiomas disponibles

Idiomas disponibles

STORING
Reassemble the blender for storage. Leave the lid open a
gap so no odors are retained.
WARNING: Never put the jar, or any other parts,
in a microwave oven. Never store foods or
drinks in the jar.
BLENDING TIPS
Liquids
Put liquids into the jar first, unless the recipe says otherwise.
Using the jar lid food chute
Do not remove the lid while in use. Food may splatter if
you do. Instead, open the jar lid food chute to add smaller
ingredients.
Working with Hot Foods or Liquids
WARNING: When you work with HOT FOODS,
remove the jar lid food chute to vent steam. Tilt
the lid away from you partially covering the opening.
Keep hands and other exposed skin away from the lid
opening to prevent possible burns.
When you work with HOT LIQUIDS, remove the jar lid
food chute and start at a low speed, and then gradually increase to a faster speed.
Do not add liquid over the cup (1L) level. Always keep hands away from steam.
Ingredients Quantities
Use only the amount of food suggested in the recipes. If you want greater amounts,
prepare in batches. Using larger amounts may overload and strain the motor. You might
also get different results from those described.
Frequently Asked Questions
Why doesn't the blender/food processor turn on?
• Make sure the base is plugged in an active power receptacle.
• Verify blinking red light is active after pushing on/off button.
How can I prevent liquids from leaking out?
Check to see that the sealing ring is correctly assembled in between the multi-functional
blade and the jar.
E n g li s h - 8
loading

Este manual también es adecuado para:

Blstrm-dz0