Página 1
Instructions Model Number: H2133 f Instrucciones Numéro de modèle : H2133 S Instructions Número de modelo: H2133 Product features and decorations may vary from picture above. Les caractéristiques du produit et les décorations peuvent varier par rapport à l’illustration ci-dessus.
Página 2
eWARNING fAVERTISSEMENT SADVERTENCIA e To prevent serious injury or death: • Never use on any elevated surface, since child’s movement may cause this bouncer to slide or tip over. • Never use on a soft surface (bed, sofa, cushion), since bouncer can tip over and cause suffocation in soft surfaces.
Página 3
e Parts f Pièces S Piezas IMPORTANT! Please remove all parts from the package and identify them before assembly. Some parts may be packed in the pad. IMPORTANT ! Retirer tous les éléments de l’emballage et s’assurer d’avoir toutes les pièces avant de commencer l’assemblage.
Página 4
Póngase en •Position the feet so the holes are toward you and the contacto con la oficina Fisher-Price más próxima a su non-skid surface is down. localidad para obtener piezas de repuesto e instrucciones, en caso de ser necesarias.
Página 5
e Assembly f Assemblage S Montaje Seat Back Tube Footrest Tube du dossier Repose-pied Tubo del respaldo Reposapiés Base Wires Supports de la base Tubos de base •Position the footrest so that the soothing unit is upright. •Fit the footrest onto the ends of the base wires. •Fit the seat back tube onto the ends of the base wire.
Página 6
e Assembly f Assemblage S Montaje Seat Back Tube PULL UP #8 x ” (1.9 cm) Screw – 2 TIRER Tube du dossier Vis n° 8 de 1,9 cm – 2 JALAR PARA ARRIBA Tubo del respaldo Tornillo N° 8 x "...
Página 7
e Assembly f Assemblage S Montaje Pad Bottom Pocket Repli inférieur du coussin Compartimento inferior de la almohadilla Pad Seat Back Pocket Repli arrière du coussin du siège Compartimento del respaldo de la almohadilla Footrest Soothing Unit Unité de vibrations du repose pieds Fastener Reposapiés con...
Página 8
e Assembly f Assemblage S Montaje Toy Bar Straps Courroies de la Jouet barre-jouets Juguet Toy Bar Plugs Cintas de la barra de juguetes Capuchons de la barre-jouets Enchufes de barra de juguetes Sockets Logements Toys Zócalos Jouets Juguetes •Fit the toy bar plugs into each socket. Hint: The toy bar is removable.
Página 9
e Battery Installation f Installation des piles S Colocación de las pilas Hint: We recommend using an alkaline battery for longer battery life. Remarque : Il est recommandé d’utiliser de pile alcaline, car elles durent plus longtemps. Consejo: Se recomienda usar pila alcalina para una mayor duración.
Página 10
e Battery Safety Information f Conseils de sécurité concernant les piles S Información de seguridad sobre las pilas Batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage: •Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
Página 11
e Setup and Use f Installation et utilisation S Preparación y uso eWARNING fAVERTISSEMENT SADVERTENCIA e To prevent serious injury or death: • Never use on any elevated surface, since child’s movement may cause this bouncer to slide or tip over. •...
Página 12
e Setup and Use f Installation et utilisation S Preparación y uso Anchored End Restraint Pad Anchored End Extrémité fixe Ceinture de retenue Extrémité fixe Extremo fijo Almohadilla de sujeción Extremo fijo Free End Free End Extrémité libre Extrémité libre Extremo libre Extremo libre TIGHTEN...
Página 13
e Soothing Unit f Unité de vibrations S Unidad relajante Power Switch Interrupteur Interruptor de encendido •Make sure your child is properly secured in the seat. • Slide the power switch to: Vibrations IMPORTANT! Low battery power causes this product to operate erratically: no vibrations and the product may not turn off. Remove and discard the battery and replace with a new “D”...
Página 14
e Care f Entretien S Mantenimiento •The pad is machine washable. Wash it separately in cold water on the gentle cycle. Do not use bleach. Tumble dry separately on low heat and remove promptly. •The frame and toys may be wiped clean using a mild cleaning solution and a damp cloth.
Página 15
1-800-382-7470. Visit us online at Reorient or relocate the receiving antenna. www.service.mattel.com. Increase the separation between the equipment Or, write to: Fisher-Price ® Consumer Relations, 636 Girard Avenue, and receiver. East Aurora, New York 14052.