Idiomas disponibles
Idiomas disponibles
3 WAY AUTO-OFF FEATURE
When the iron is plugged in, the Power Indicator will light steadily, indicating that there is
power to the iron.
IF YOU LEAVE THE IRON
• In a horizontal position without moving it, or accidentally tip the iron over, it will
automatically stop heating after 30 seconds. The ON/OFF indicator light will blink
repeatedly to let you know that the iron has stopped heating.
• In a vertical position (on its heel rest) without moving it, the iron will automatically turn
off after 15 minutes. The ON/OFF indicator light will blink repeatedly to let you know that
the iron has stopped heating.
TO RESET THE IRON
Move the iron back and forth and allow it to reheat for 2 minutes. The indicator will stop
blinking and the iron will start heating again.
WARNING: The 3 Way Auto-Off is a safety feature, not a recommended means for
turning your iron off.
MAINTENANCE AND CLEANING
Before cleaning the Iron, always make sure that it is disconnected from the electrical wall
socket and is completely cool.
SOLEPLATE
• Residue on the Soleplate can be wiped off with a cloth soaked in a solution of water and
vinegar.
• Do not use scouring pads, abrasives or chemical cleaning solvents as they may
damage the finish.
HOUSING
• The housing can be cleaned with a moist cloth and then wiped dry.
• Other than the recommended cleaning, no further user maintenance should be
necessary. If for any reason your Steam Iron should require repairs, do not try to fix it
yourself. Send it to an Authorized Service Center.
GCSTAC6901_GCSTAC6902_GCSTAC6951_GCSTAC6952_GCSTAC6953_20SEM1 (LA).indd 10
GCSTAC6901_GCSTAC6902_GCSTAC6951_GCSTAC6952_GCSTAC6953_20SEM1 (LA).indd 10
E n gl is h- 10
5/21/20 09:27
5/21/20 09:27
