Idiomas disponibles
Idiomas disponibles
1. Turn off the Iron and disconnect the plug from the electrical wall outlet before filling
the Iron with water.
2. Turn the Steam Select Lever to the closed position
3. Set the Iron in the position indicated below (Figure 2) and fill it with water, no higher
than the Max fill level shown on the See Through Water Window.
1. Insert the plug in the electrical wall socket.
2. Make sure that the Steam Select Lever is in the closed position
3. Select the desired temperature on the Temperature Control Dial.
4. When the Temperature Indicator Light turns on, you may start to iron.
GCSTAC6901_GCSTAC6902_GCSTAC6951_GCSTAC6952_GCSTAC6953_20SEM1 (LA).indd 5
GCSTAC6901_GCSTAC6902_GCSTAC6951_GCSTAC6952_GCSTAC6953_20SEM1 (LA).indd 5
FILLING WITH WATER
Figure 2
DRY IRONING
E n g l is h -5
.
.
5/21/20 09:27
5/21/20 09:27
