Setting The Temperature; Maintenance And Cleaning - Oster GCSTBS5001 Manual De Instrucciones

1. Set the iron in on upright position.
2. Connect the Iron to an electrical wall socket.
3. Set the Temperature Control dial (Figure 4) to the correct ironing temperature
as indicated on the lable or the temperature settings table.
The Anti Calc feature helps prevent the build up of mineral deposits in your iron. This prolongs its life and
improves the iron's performance. Mention that this feature is built into the product. This sustenance does
not tell you anything.
Before cleaning the Iron, always make sure that it is disconnected from the electrical wall socket and is
completely cool.
SOLEPLATE
• Residue on the Soleplate can be wiped off with a cloth soaked in a solution of water and vinegar.
• Do not use scouring pads, abrasives or chemical cleaning solvents as they may damage the finish.
HOUSING
• The housing can be cleaned with a moist cloth and then wiped dry.
• Other than the recommended cleaning, no further user maintenance should be necessary. If for any
reason your Steam Iron should require repairs, do not try to fix it yourself. Send it to an Authorized
Service Center (please refer to the warranty included in the box).
1.
Turn off the iron and disconnect the plug from the electrical wall socket.
2.
Set the Iron in an upright position and let it cool down completely.
3.
Set the Steam Select Switch to the closed position
4.
Empty out all the water remaining in the Water Reservoir by opening the Water Reservoir Lid and
inverting the Iron over the sink.
5.
The Power Cord can be wound around the Heel Rest for easier and tidy storing once the unit has
cooled down. The Iron should always be stored in an upright position.
GCSTBS5001_GCSTBS5002_GCSTBS5003_GCSTBS5004_GCSTBS5051_GCSTBS5052_GCSTBS5053_20SEM1 (LA).indd 5

SETTING THE TEMPERATURE

ANTI-CALC

MAINTENANCE AND CLEANING

STORING THE IRON
E n g l is h -5
(figure 4)
.
11/19/20 4:05 PM