Idiomas disponibles
Idiomas disponibles
3.
OPERATING INSTRUCTIONS
1. Connect the power plug to the AC power outlet.
• Level 2 charging: connect to a 240V AC outlet.
• Level 1 charging: use included 120V adapter cable, and connect to a 120V AC outlet.
2. Check Power LED.
3. Connect the SAE J1772 plug to your electric vehicle.
4. Check LEDs for charging status. See table below.
5. When charging is complete, disconnect the SAE J1772 plug from the vehicle, and then unplug the
cable from the power outlet.
6. Store indoors when not in use.
LED INDICATORS
POWER (red)
CONNECTION (green)
CHARGING (blue)
FAULT (yellow)
LED BEHAVIOR
POWER
(RED)
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
SOLID
4.
SPECIFICATIONS
Input/Output ...................................................................................................110-240V AC 16A 50/60Hz
Output power ..................................................................................................................................3.8Kw
Charger cord length ..........................................................................................................................8.5m
Operating temperature ........................................................................................................-22° to 122°F
Ingress protection ............................................................................................................................. IP55
5.
BEFORE RETURNING FOR REPAIRS
For REPAIRS OR RETURNS, visit 365rma.com
Visit batterychargers.com for Replacement Parts.
6.
LIMITED WARRANTY
For information on our one year limited warranty, please visit batterychargers.com
or call 1-800-621-5485 to request a copy.
Go to batterychargers.com to register your product online.
CONNECTION
CHARGING
(GREEN)
(BLUE)
OFF
OFF
SOLID
OFF
SOLID
BLINKING
SOLID
SOLID
SOLID
OFF
BLINKING
BLINKING
SOLID
BLINKING
BLINKING
BLINKING
OFF
OFF
SOLID
SOLID
FAULT
(YELLOW)
OFF
Receiving power, but not connected
OFF
Connected, but not charging
Charging
OFF
OFF
Charging completed
SOLID
Communication fault
Overload protection
OFF
SOLID
Abnormal current
SOLID
Leakage protection
Overvoltage or undervoltage protection
BLINKING
SOLID
Protection against unit overheating
• 2 •
CONDITION
