Idiomas disponibles
Idiomas disponibles
English
Installation (Figure 1)
1.
Please connect the WAP-6013 to the RJ-45 Ethernet Port of
your PC. Then Power-On the WAP-6013.
2.
Installation is now completed. You can now begin to
configure the device.
Check Your Network Settings to login web UI (Figure 2)
1. Please make sure your PC can get IP address automatically,
so the router can communicate with your PC during
configuration.
Select "Control Panel" > "Network Connections".
Right click the "Local Area Connection" and choose
"Properties".
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the
following screen and make sure you have selected "Obtain
IP address automatically"
Before you begin, please have your ISP‟s username and
password details ready.
7
