Switching Off; Temperature Regulation; Coolmatic Function; Longfresh Compartment Setting - AEG SFE81826ZC Manual De Instrucciones

6 www.aeg.com
Mode
5
It is possible to change predefined
sound of buttons by pressing together
3.2 Display
A
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" .

3.4 Switching off

1. Press the appliance ON/OFF for 5
seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

3.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default set temperature:
• +5°C for the fridge
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
B C D E
H G F
ON/OFF
6
Mode and temperature colder button for
a few seconds. Change is reversible.
A. Timer indicator
B. COOLMATIC function
C. LongFresh function
D. FROSTMATIC function
E. Temperature indicator
F. Alarm indicator
G. ChildLock function
H. MinuteMinder function

3.6 COOLMATIC function

If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1. Press the Mode until the
corresponding icon appears.
The COOLMATIC indicator flashes.
2. Press the OK to confirm.
The COOLMATIC indicator is shown.
The COOLMATIC function shuts off
automatically after approximately 6
hours.
To switch off the function before its
automatic end, repeat the procedure.
The function switches off by
selecting a different fridge
set temperature.
3.7 LongFresh compartment
setting
1. Press Mode until the corresponding
icon appears.
The display shows 3. This is the default
setting that ensures the most effective
performance.
2. Press the temperature buttons on the
control panel to select necessary
setting.
3. Press OK to confirm the setting.