Idiomas disponibles
Idiomas disponibles
USE
Cooling Mode
In this mode, the exhaust hose must be connected to the outside of the home.
1 - Press the
button on the control panel or the ON/OFF button on the remote control to turn on the device
2 - Press the
button on the control panel several times to turn on the
control
3 - Adjust the setpoint temperature (desired temperature) using buttons
button on the control panel several times or press the SPEED button on the remote control to set the fan speed
4 - Press the
to one of the 3 speeds or "Auto" (speed adapted automatically)
Simultaneously press the
and
change the temperature display unit between °C (Degrees Celsius) and °F ( Degrees Fahrenheit)
Fan mode
button on the control panel or the ON/OFF button on the remote control to turn on the device
1 - Press the
2 - Press several times the button
indicator.
button on the control panel several times or press the SPEED button on the remote control to set the fan speed
3 - Press the
to one of the 3 speeds
The "Auto" speed and the temperature setting are not available in Ventilation mode.
Dehumidification mode (Dry)
In this mode, the continuous drainage pipe must be connected to drain the water into a container or to the sewage system.
1 - Press the
button on the control panel or the ON/OFF button on the remote control to turn on the device
2 - Press button
on the control panel several times to turn on the
Fan speed and temperature adjustment are not available in Dehumidification mode.
Automatic Mode (Auto)
In this mode, the device automatically determines the settings necessary to reach the set temperature.
button on the control panel or the ON/OFF button on the remote control to turn on the device
1 - Press the
2 - Press several times button
3 - Adjust the setpoint temperature (desired temperature) using buttons
Timer
The timer is used to start or stop the device after a time set between 0.5 h (30 min) and 24 h
• Switch on the appliance with the timer
1 - Switch on the appliance, choose the operating mode (Cool, Dry, Fan) and adjust the setpoint temperature and fan speed
button on the control panel or the ON/OFF button on the remote control to turn off the device
2 - Press the
button on the control panel or the TIMER button on the remote control
3 - Press the
4 - Set the time until the desired switch-on time using keys
5 - When the set time has elapsed, the air conditioner will turn on with the settings.
• Switch off the appliance with the timer
1 - Switch on the appliance, choose the operating mode (Cool, Dry, Fan) and adjust the setpoint temperature and fan speed
button on the control panel or the TIMER button on the remote control
2 - Press the
3 - Set the time until the desired stop time using the
4 - When the set time has elapsed, the air conditioner will turn off automatically.
If the timer is set by the remote control, it is necessary to confirm the leadtime by pressing TIMER again.
buttons on the control panel for 3 seconds, or press the °C/F button on the remote control to
on the control panel or the button MODE on the remote control to turn on the
on the control panel or button MODE on the remote control to turn on the "AUTO" indicator
and
and
buttons (in number of hours)
indicator or press the COOL button on the remote
and
.
indicator or press button DRY on the remote control
and
.
(in number of hours)
FR
ES
PT
IT
EL
PL
UA
RO
EN
45
