Idiomas disponibles
Idiomas disponibles
device to control ambient temperature.
9. Before inserting the plug make sure that the voltage is the same
as indicated on the device.
10. Do not use in presence of gas, inflammable or explosive liquids
or substances.
11. Some fundamental rules which apply to all electrical devices
must be observed when using the heater:
Do not touch the heather with wet hands.
•
Do not handle with bare feet.
•
Do not pull the electric cord or the device itself to unplug it
•
from the socket; pull the plug directly.
12. Avoid the use of an extension cord with this product, because
the extension cord may overheat and cause a risk of fire.
13. Do not apply any modification to the product that could compro-
mise the safety.
14. Keep connections dry.
15. If the power supply cord is damaged, avoid to use the appliance.
For power cord replacing, please contact the manufacturer or the
technical service or a person with similar qualification, in order to
avoid any risk.
16. If the appliance is not used for a long period, disconnect it from
the power supply.
17. Always unplug the appliance before doing any maintenance op-
eration.
CAUTION — Some parts of this product can become very hot
and cause burns. Particular attention has to be given where
children and vulnerable people are present.
2. ELECTRICAL INSTALLATION
The installation should always be carried out by a qualified
electrician or a competent person in accordance with the
standards HD 384 CENELEC for Europe, or international IEC
60346-7-708 1988 and according to the UE 2015/1188 standards. The
energy supply must be done through a properly grounded socket and
the impedance of the electrical network must be less than 0.3 ohm.
An overvoltage category III Combined Circuit breaker and Residual
12
