Oral-B iO Manual Del Usuario página 9

handle is awake (display turned on). Select a
mode by pressing the on/off button (7). Your
toothbrush starts in the selected default mode.
You may also change modes during brushing.
Note: You may also customize mode settings via
Oral-B App.
Interactive Display
Turn on the interactive display (4) by pressing
the on/off button (7). If not further instructed
on the display, you may toggle with the mode
button and select with the on/off button.
(10-16) «Mode selection» – toggle by pressing
the mode button and select default start mode
with on/off button.
(17) «Settings» – toggle through all modes until
you reach the option «Settings»; to enter press
the on/off button:
-> (19) manage Bluetooth settings (enable,
disable)
-> (20) select/change colour of Light Ring
-> (21) select/change language
-> (22) perform factory reset
(24) «Timer» – displays brushing time.
(25) «Battery status» – shows battery status
after use, when charging or when battery is
low.
(26) «Exchange reminder» – reminds you when
to replace your brush head.
(27) «Brush feedback» – brushing feedback is
indicated with a smiley face.
«Brush waking» when handle is picked up, lifted off
the plugged-in charger or when you press the on/
off button the handle indicates its readiness.
«Error messages» – «outside operating limits»:
you are operating or charging outside standard
temperatures and/or above standard battery cur-
rent.
Brush heads
Oral-B offers you a variety of different Oral-B iO
brush heads (c/d) that only fit your Oral-B iO
toothbrush handle and can be used for tooth-by-
tooth precision cleaning.
Most iO Oral-B brush heads feature INDICATOR
bristles to help you monitor brush head replace-
ment need. With thorough brushing, twice a day
for two minutes, the bristle colour will fade half-
way approximately within 3 months, indicating the
need to exchange your brush head. If the bristles
splay before the colour recedes, you may exert
too much pressure on teeth and gums. In gen-
eral, we recommend replacing the brush head
every 3 months.
Connecting your toothbrush
to your Smartphone
The Oral-B App is available for smartphones run-
ning iOS or Android™ operating systems. It can
be downloaded for free from App Store
Google Play™ or you may scan the QR code on
the back page of this manual (i).
• Launch the Oral-B App. It will guide you
through the entire Bluetooth pairing proce-
dure. You may also find it under the App's set-
tings (More -> Your brush).
Note: Oral-B App functionality is limited if
Bluetooth is deactivated on your smartphone
(for directions please refer to your smartphone's
user manual).
• Pairing is indicated via the Smart Pressure
Sensor light. Any App instructions will be dis-
played on your smartphone.
• You may change Bluetooth settings at any time
on your handle via the display -> Settings ->
Bluetooth enable/disable.
• Keep your smartphone in close proximity
(within 5m distance) when using it with the
handle. Make sure the smartphone is safely
positioned in a dry place.
Note: Your smartphone must support Bluetooth
4.2 (or higher) / Bluetooth Smart in order to pair
your handle. Check app.oralb.com for compatible
smartphones and country availability of the Oral-B
App.
Caution: Follow your smartphone's user manual
to ensure your phone/charger is designed for use
in a bathroom environment.
Cleaning recommendations
After brushing, rinse your brush head under run-
ning water with the handle switched on. Remove
the brush head and clean the handle and brush
head separately. Make sure water runs inside the
® top of the handle as well as inside the brush
head. Wipe all parts dry and let them air-dry
before reassembling your toothbrush again.
Unplug the charger before cleaning. Clean the
charger regularly with a damp cloth. Please
check individual cleaning instructions for each
accessory in its «Accessories» paragraph.
(SM)
/
9