Behringer DIGITAL REVERB DR600 Manual De Instrucciones página 2

Ocultar thumbs Ver también para DIGITAL REVERB DR600:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 3
2
DIGITAL REVERB DR600
Use the two 1/4" TS connectors IN A and IN B to plug in a stereo
(7)
input signal. For mono use just plug in IN A.
The two 1/4" TS connectors OUT A and OUT B send the signal to
(8)
your amp. Use both connectors if you want to achieve full stereo
effect. For mono use just plug in OUT A.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery (not included), press the hinges with
a ballpoint pen and remove the pedal cover. Be careful not to scratch
the unit.
◊ ◊
The DR600 has no on/off switch. As soon as you insert the
jack into the IN connector, the DR600 begins running.
When not using the DR600, remove the jack from the IN
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Limited Warranty
For the applicable warranty terms and conditions and additional
information regarding Music Tribe's Limited Warranty, please see
complete details online at community.musictribe.com/pages/
support#warranty.
4. Specifications
In A
Connector
Impedance
Impedancia mono
In B
Connector
Impedance
Out A
Connector
Impedance
Out B
Connector
Impedance
Power Supply
Behringer PSU-SB
USA/Canada
China/Korea
UK/Australia
Europe
Japan
Power connector
Battery
Power consumption
Physical/Weight
Dimensions
(H x W x D)
Weight
Behringer is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may therefore differ from those listed or shown.
User Manual
1/4" TS
500 kΩ
250 kΩ
1/4" TS
500 kΩ
1/4" TS
1 kΩ
1/4" TS
1 kΩ
9 V , 100 mA regulated
120 V~, 60 Hz
220 V~, 50 Hz
240 V~, 50 Hz
230 V~, 50 Hz
100 V~, 50 - 60 Hz
2 mm DC jack, negative center
9 V type 6LR61
90 mA
approx. 2 1/8 x 2 3/4 x 4 4/5"
approx. 54 x 70 x 123 mm
approx. 0.73 lbs / 0.33 kg
3
loading