6.
LIGHTING
6.1. Led Characteristics
✓ LED 3000K (Not Dimmable)
✓ On / Off
✓ Beam Angle 60º
✓ Lens Material PC
✓ 12V
✓ Lumen 255
✓ PW Consumption: 2,2W
6.2 Replacing the LED lights:
LED are removable from outside the hood. Access the LED commands by unscrewing and pulling out the housing support of the LED and
control panel. Remove LEDs by pushing the tabs.
7.
GRESE FILTERS
BAFFLE FILTER SHOULD BE EXAMINED PERIODICALLY TO ASSURE THAT ALL SURFACES AND PARTS ARE CLEAN.
The function of the grease filter is the absorption of fat particles that are formed during cooking.
To remove the grease filter, pull from the handle.
✓ The filters are dishwasher safe or in a sink with hot, soapy water
✓ Easy periodic cleaning will assure optimum filter performance
✓ Do not use caustic detergent to clean the filters. abrasive cleaners may harm or damage the finish
✓ Do not disassemble the baffle filter. Disassembly will void the warranty.
Features of Baffle filters:
✓ Thicker baffle filters 0.79 inch - 20mm - which improve airflow
✓ Springs system for easy removal.
✓ Dishwasher safe
✓ All metal design makes them more durable and require low maintenance
✓ Safer and more effective grease collection tha standard inox filters-.
✓ Its blades act as fire barrier and prevents flames traveling past the hood
8.
CHARCOAL / CARBON FILTERS
Before performing this procedure, make sure that the hood is switched off and that the motor is not running. For further safety, disconnect the
hood from the power supply. Some hoods have a switch power button inside, apart from their remote control.
8.1. Carbon filters integrated into the motor (indicated models only). (Fig.7)
1. Lay the filter on the side of the engine, matching the notches A with B.
2. Once faced, turn a quarter of a turn in any direction.
3. Repeat the operation on each side of the engine. (Install 2 filters)
5