Riservato ad operatori qualificati - Reserved to qualified operators - Für qualifizierte Betrieben - Resérvé aux personnel qualifié - Reservado a técnicos calificados
EN
11 ADVANCED PROGRAMMING
11.6
UV LAMP. ALARM
How to change
the setting
NO
Press this button to go to the
next screen
FILTER ALARM
11.7
How to change
the setting
NO
Press this button to go to the
next screen
11.8
DAYS LAMP ON
How to reset
the counter
NO
Press this button to go to the
next screen
?
This is a warning that appears for the UV lamp filter (if installed).
The factory-set value is (0), i.e., no alarm message is displayed.
To enable the "UV LAMP" alarm enter a value on the timer from 0 to 2000
days. Consider that the UV lamp in the dispensing area (optional) has an ave-
rage lifetime of 250 days (6000 hours). A warning message informing that the
lamp will soon need replacement appears when 90% of its preset lifetime has
lapsed.
YES
This is a warning that appears when the filter (if installed) is almost worn out
The factory-set value is 0 litres, i.e., no alarm message is displayed.
?
To enable the "FILTER" alarm set the counter to a value from 0 to 20000 litres.
A warning message informing that the filter will soon need replacement appears
when 90% of its preset filtering capacity has lapsed.
YES
?
This is the counter for the days of operation of the UV lamp, and can be used to
determine how many hours are left before the replacement warning is displayed.
This counter can be reset.
YES
36
Buttons 1-2 for setting the interval (in hours) between lamp replace-
ments.
Press this button to confirm.
Warning! To complete the operation you must reset the counter as
described in screen 11.9
Buttons 1-2 for setting the quantity of supplied water (litres) between
filter replacement.
Press this button to confirm.
Warning! To complete the operation you must reset the subtotal litre
counter as described in screen 11.9
Press and hold the button
5561480
