Idiomas disponibles
Idiomas disponibles
Scorpion 40 Installation Manual: English
6. Press the
7. Exit SMIT
Controlling data compression under AIX
After you run SMIT, device files will have been created for
your new tape drive. Typical filenames are listed below:
/dev/rmt0
/dev/rmt0.4
If you enter the configuration information specified in step 5 of
the configuration process, devices rmt0, rmt0.1, rmt0.2 and
rmt0.3 will cause the drive to write in compressed mode.
Using devices rmt0.4, rmt0.5, rmt0.6 and rmt0.7 will cause the
drive to write with compression disabled.
•
Set the "Maximum delay for the Read/Write
command" to 900
RETURN
system database and the appropriate devices created
/dev/rmt0.1 /dev/rmt0.2 /dev/rmt0.3
/dev/rmt0.5 /dev/rmt0.6 /dev/rmt0.7
key. The drive will be installed in the
A-39
