Installing And Removing The Maxi-Cosi Cabriofix; Maintenance - Maxi-Cosi Easy Fix Instrucciones De Uso

Ocultar thumbs Ver también para Easy Fix:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
• Take the seat belt out from between the base and the blue belt clamp (23,1) and fasten the belt
23
clamp (23,2).
• Remove the Maxi-Cosi EasyFix from the car.

4. INSTALLING AND REMOVING THE MAXI-COSI CABRIOFIX

A. Installing the Maxi-Cosi CabrioFix
• Position the Maxi-Cosi CabrioFix facing backwards (with the back facing the direction of driving) on top
24
of the Maxi-Cosi EasyFix (24). The carrying handle should be in the upright position.
• Click the Maxi-Cosi CabrioFix with its 2 spindles onto the anchor points of the Maxi-Cosi EasyFix (25).
25
• NOTE! A clear click should be audible and the indicators should now be completely on green (26).
26
• NOTE! Under no circumstances should this product be used if the indicator remains on red. Carry out
the above actions again. In case of doubt or if you have any questions, contact the manufacturer.
• Check that Maxi-Cosi CabrioFix has been installed correctly by pulling on it.
To install the child in the Maxi-Cosi CabrioFix or to remove him/her, see the Maxi-Cosi CabrioFix user
instructions. The optimum safety of your child is only guaranteed if the Maxi-Cosi CabrioFix is used
correctly. It is therefore important that you take the time to read these instructions through carefully.
However, if you do not have these instructions, contact our service point in your country or download the
necessary information from our internet site: www.maxi-cosi.com.
B. Removing the Maxi-Cosi CabrioFix
• Unlock the Maxi-Cosi CabrioFix by pulling the release lever upwards and at the same time forwards (27).
27
28
This releases the spindles from the anchor points and take the Maxi-Cosi CabrioFix out of the Maxi-Cosi
EasyFix (28).

5. MAINTENANCE

• IMPORTANT! Always remove the Maxi-Cosi EasyFix from the car before carrying out any of the following.
• Use lukewarm water, soap and a rag to clean the plastic parts of the Maxi-Cosi EasyFix. Do not use
abrasive cleaners.
• IMPORTANT! Never use lubricants, not even for the moving parts on the Maxi-Cosi EasyFix.
Instructions for use
GB
15
Tabla de contenido
loading

Tabla de contenido