Idiomas disponibles
Idiomas disponibles
Initial Operation
Do not use the equipment wi-
thout the hand guard. Wear sui-
table clothing and work gloves
when working with the equip-
ment.
Ensure that the equipment is
functional before each use. The
On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop wor-
king with the equipment. Ensure
that the mains voltage value
matches the label on the equip-
ment.
Note noise protection and local
specifications. The use of the
equipment on certain days (e.g.
Sundays and national holidays), at
certain times of day (lunch times,
night time quiet periods) or in spe-
cial areas (e.g. health resorts, clin-
ics etc.) is restricted or forbidden.
Switching on and off
The charge levels of the inserted
batteries do not need to be iden-
tical. However, the device will not
start if one of the two batteries is
exhausted.
Ensure your stance is stable and
hold the appliance tightly with both
hands and away from your body.
Before switching the apparatus on,
make sure that it is not touching
any objects.
1. To start, press and hold the safety
switch (25) while pressing the start
switch (26). The cordless brush cutter
runs at top speed. You can release
the safety switch (25) again.
2. To switch it off, release the start
switch (26).
Checking the charge
status of the batteries
The battery charge level indicator (24)
shows the state of charge of the bat-
tery (21).
Press the button for the charge level indi-
cator (24) on the device. The charge level
of the battery is indicated by illumination
of the corresponding LED lights (3 LEDs
per charge level indicator).
3 LEDs illuminated (red, orange and
green): Battery charged
2 LEDs illuminated (red and orange):
Battery partially charged
1 LED illuminated (red):
Battery needs to be charged
Charge the battery (21) when only
the red LED on the level indica-
tor (24) is illuminated.
Working using the thread spool
•
In small grass areas hold the device
at an angle of about 30° and swing
the cutting head evenly to the right
and left with a semi-circular mo-
vement.
•
The best results are obtained with a
maximum grass length of 15 cm. If
the grass is taller, it is recommended
to mow several times.
GB
131
