Idiomas disponibles
Idiomas disponibles
Desired temperature: °C
Off
Name of zone
Absence
Zone
Ventilation boost
Time programme assistant
2.7.2 Menu item INFORMATION
MENU
INFORMATION
Current temperatures
Zone
Current room air humidity
Control elements
Menu introduction
Competent person contact info
Phone number
Company
Serial number
2.7.3 Menu item SETTINGS
MENU
SETTINGS
Installer level
Enter access code
Fault history
10
What do the different temperatures mean?
(→ Section 2.2)
Cooling is switched off, domestic hot water
remains available.
Changing the name Zone 1, which was set at
the factory
During this time, heating mode runs at the
defined set-back temperature.
Factory setting: Set-back temperature: °C
15 °C
Applies for the selected zone in the specified
time period.
Heating mode is interrupted for 30 minutes.
Programming the desired temperature for
Monday–Friday and Saturday–Sunday. The
programming applies for the time-controlled
functions Heating and Cooling.
The time programme assistant overwrites the
weekly planner for the Heating and Cooling
functions.
Current room temperature in the zone
Current room air humidity, measured using the
installed humidity sensor
Explanation of the control elements
Explanation of the menu structure
The competent person can store their tele-
phone number.
Identification of the product. The 7th to 16th di-
gits of the serial number form the article num-
ber
Access to the installer level, factory setting: 00
If the access code is unknown, reset the
remote control to the factory setting.
Faults are listed in chronological order
Operating and installation instructions 0020298957_02
